Benno Bike Covers — Boost, RemiDemi & 46er

Benno's Etility bikes squeeze cargo-bike usefulness into a footprint not much bigger than a regular bike — which is exactly why so many of them live outside the front door, hauling kids and shopping every day.

Most Bennos are standard-bike shaped and take the XL / MTB. The exception is the RemiDemi XL, a true longtail that takes the Longtail WS when seats are fitted.

Which BikeParka fits your Benno?

Model	Length (circa)	Recommended cover
Boost E	188cm	XL / MTB
RemiDemi 9D	171cm	XL / MTB
46er	Standard-bike footprint	XL / MTB
RemiDemi XL (longtail)	188–193cm depending on accessories	Usually Longtail WS (fits two child seats); Longtail without seats

Child seats, baskets, racks and other accessories can affect the fit. Running an unusual setup? Send us your exact model and accessories and we'll check it before you order.

Every BikeParka cover is made from waterproof ripstop with taped seams and has lock slots, so you can lock cover and bike together. Adjustable toggles cinch the cover down in wind, and each one packs into its own Stuff Sac.

How to fit a cover on a longtail

The BikeParka Longtail and Longtail WS go on back-to-front. Start with the rear of the cover over the rear deck, rack or child seats. Work the cover forward along the bike and pull the front over the handlebars. Finally, adjust the toggles so the cover sits snug.

Benno cover questions

Which cover fits the Benno Boost?

The XL / MTB. At about 188cm long with riser bars, the Boost is standard-bike shaped — the XL's extra room covers the cockpit and any front basket.

Which cover fits the Benno RemiDemi XL?

The RemiDemi XL is a proper longtail that can carry two child seats on its rack, so we recommend the Longtail WS. A bare RemiDemi XL can use the standard Longtail.

Does a front basket or rack change the cover choice?

Usually not on a Benno — the XL / MTB has room for front baskets. If your setup is heavily loaded, send us a photo or your measurements and we'll confirm.